SH7201 Datasheet, PDF (991/1196 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 23 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
13, 12 PC11MD
[1:0]
00/01* R/W
PC11 Mode
These bits control the function of the PC11/WR2/
TIOC2A/DACT2 pin.
00: PC11 I/O (port)
01: WR2 output (BSC)
10: TIOC2A I/O (MTU2)
11: DACT2 output (DMAC)
11 to 9 —
All 0 R
Reserved
These bits are always read as 0. The write value
should always be 0.
8
PC10MD0 0/1* R/W PC10 Mode
This bit controls the function of the PC10/WR1 pin.
0: PC10 I/O (port)
1: WR1 output (BSC)
7 to 5 —
All 0 R
Reserved
These bits are always read as 0. The write value
should always be 0.
4
PC9MD0 1
R/W PC9 Mode
This bit controls the function of the PC9/WR0 pin.
0: PC9 I/O (port)
1: WR0 output (BSC)
3 to 1 —
All 0 R
Reserved
These bits are always read as 0. The write value
should always be 0.
0
PC8MD0 1
R/W PC8 Mode
This bit controls the function of the PC8/RD pin.
0: PC8 I/O (port)
1: RD output (BSC)
Note: * The initial value depends on the LSI's operating mode.
Rev. 2.00 Sep. 07, 2007 Page 963 of 1164
REJ09B0321-0200