SH7201 Datasheet, PDF (617/1196 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
(23) Operation when Error Occurs during Complementary PWM Mode Operation, and
Operation is Restarted in Complementary PWM Mode
Figure 12.147 shows an explanatory diagram of the case where an error occurs in complementary
PWM mode and operation is restarted in complementary PWM mode after re-setting (when
operation is restarted using the cycle and duty settings at the time the counter was stopped).
1
2
3
4
Power-on TOCR TMDR TOER
MTU2
reset
(CPWM) (1)
module output
5
PFC
(MTU2)
6
TSTR
(1)
7
Match
8
9
10
11
12
Error PFC TSTR PFC TSTR
occurs (PORT) (0) (MTU2) (1)
13
Match
TIOC3A
TIOC3B
TIOC3D
Port output
PB16
PB17
High-Z
High-Z
PB19
High-Z
Figure 12.147 Error Occurrence in Complementary PWM Mode,
Recovery in Complementary PWM Mode
1 to 10 are the same as in figure 12.145.
11. Set MTU2 output with the PFC.
12. Operation is restarted by TSTR.
13. The complementary PWM waveform is output on compare-match occurrence.
Rev. 2.00 Sep. 07, 2007 Page 589 of 1164
REJ09B0321-0200