SH7201 Datasheet, PDF (672/1196 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 15 Realtime Clock (RTC)
15.3.7 Month Counter (RMONCNT)
RMONCNT is used for setting/counting in the BCD-coded month section. The count operation is
performed by a carry for each month of the date counter.
The assignable range is from 01 through 12 (practically in BCD), otherwise operation errors occur.
Carry out write processing after stopping the count operation through the setting of the START bit
in RCR2.
RMONCNT is not initialized by a power-on reset or manual reset, or in deep standby and software
standby modes.
Bit: 7
6
5
4
3
2
1
0
—
—
—
10
months
1 month
Initial value: 0
0
0 —————
R/W: R R R R/W R/W R/W R/W R/W
Bit
7 to 5
4
3 to 0
Bit Name

10 months
1 month
Initial
Value
R/W
All 0
R
Undefined R/W
Undefined R/W
Description
Reserved
These bits are always read as 0. The write value should
always be 0.
Counting Ten's Position of Months
Counting One's Position of Months
Counts on 0 to 9 once per month. When a carry is
generated, 1 is added to the ten's position.
Rev. 2.00 Sep. 07, 2007 Page 644 of 1164
REJ09B0321-0200