HD64F7051SFJ20V Datasheet, PDF (533/843 Pages) Renesas Technology Corp – Hardware Manual Renesas 32-Bit RISC

Section 16 Pin Function Controller (PFC)
Port G Control Register 1 (PGCR1)
Bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PG15 PG15 PG14 PG14
PG13
PG12
PG11
PG10
PG9
PG8
MD1 MD0 MD1 MD0 ^— MD0 ^— MD0 ^— MD ^— MD ^— MD ^— MD
Initial value: 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0
R/W: R/W R/W R/W R/W R R/W R R/W R R/W R R/W R R/W R R/W
Bits 15 and 14—PG15 Mode Bits 1 and 0 (PG15MD1, PG15MD0): These bits select the
function of pin PG15/IRQ5/TIOB5.
Bit 15: Bit 14:
PG15MD1 PG15MD0 Description
0
0
General input/output (PG15)
1
Interrupt request input (IRQ5)
1
0
ATU input capture input/output compare output (TIOB5)
1
Reserved
(Initial value)
Bits 13 and 12—PG14 Mode Bits 1 and 0 (PG14MD1, PG14MD0): These bits select the
function of pin PG14/IRQ4/TIOA5.
Bit 13: Bit 12:
PG14MD1 PG14MD0 Description
0
0
General input/output (PG14)
1
Interrupt request input (IRQ4)
1
0
ATU input capture input/output compare output (TIOA5)
1
Reserved
(Initial value)
Bit 11—Reserved: This bit is always read as 1, and should only be written with 1.
Bit 10—PG13 Mode Bit (PG13MD): Selects the function of pin PG13/TIOD4.
Bit 10:
PG13MD
0
1
Description
General input/output (PG13)
ATU input capture input/output compare output (TIOD4)
(Initial value)
Bit 9—Reserved: This bit is always read as 1, and should only be written with 1.
Rev. 5.00 Jan 06, 2006 page 511 of 818
REJ09B0273-0500