HD64F7051SFJ20V Datasheet, PDF (151/843 Pages) Renesas Technology Corp – Hardware Manual Renesas 32-Bit RISC

CK
Address
CSn
CSm
RD
WRx
Data
T₁
T₂
Section 8 Bus State Controller (BSC)
T_idle
T₁
T₂
CSn space read
Idle cycle
CSm space write
Figure 8.7 Idle Cycle Insertion Example
IW31 and IW30 specify the number of idle cycles required after a CS3 space read either to read
other external spaces, or for this LSI, to do write accesses. In the same manner, IW21 and IW20
specify the number of idle cycles after a CS2 space read, IW11 and IW10, the number after a CS1
space read, and IW01 and IW00, the number after a CS0 space read.
DIW specifies the number of idle cycles required, after a DRAM space read either to read other
external spaces (CS space), or for this LSI, to do write accesses.
0 to 3 cycles can be specified for CS space, and 0 to 1 cycle for DRAM space.
Rev. 5.00 Jan 06, 2006 page 129 of 818
REJ09B0273-0500