SH7618 Datasheet, PDF (510/646 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7618 Series

Section 18 User Break Controller (UBC)
Initial
Bit
Bit Name Value R/W Description
7
CDB1
0
R/W L Bus Cycle/I Bus Cycle Select B
6
CDB0
0
R/W Select the L bus cycle or I bus cycle as the bus cycle of the
channel B break condition.
00: Condition comparison is not performed
01: The break condition is the L bus cycle
10: The break condition is the I bus cycle
11: The break condition is the L bus cycle
5
IDB1
0
R/W Instruction Fetch/Data Access Select B
4
IDB0
0
R/W Select the instruction fetch cycle or data access cycle as
the bus cycle of the channel B break condition.
00: Condition comparison is not performed
01: The break condition is the instruction fetch cycle
10: The break condition is the data access cycle
11: The break condition is the instruction fetch cycle or
data access cycle
3
RWB1
0
R/W Read/Write Select B
2
RWB0
0
R/W Select the read cycle or write cycle as the bus cycle of the
channel B break condition.
00: Condition comparison is not performed
01: The break condition is the read cycle
10: The break condition is the write cycle
11: The break condition is the read cycle or write cycle
1
SZB1
0
R/W Operand Size Select B
0
SZB0
0
R/W Select the operand size of the bus cycle for the channel B
break condition.
00: The break condition does not include operand size
01: The break condition is byte access
10: The break condition is word access
11: The break condition is longword access
Rev. 6.00 Jun. 12, 2007 Page 478 of 610
REJ09B0131-0600