SH7618 Datasheet, PDF (249/646 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7618 Series

Section 10 Power-Down Modes
10.2 Input/Output Pins
Table 10.2 lists the pins used for the power-down modes.
Table 10.2 Pin Configuration
Pin Name
Reset input pin
Abbr. I/O
RES Input
Description
Reset input signal. Reset by low level.
10.3 Register Descriptions
There are following registers used for the power-down modes. For details on the addresses of
these registers and the states of these registers in each processing state, see section 20, List of
Registers.
• Standby control register (STBCR)
• Standby control register 2 (STBCR2)
• Standby control register 3 (STBCR3)
• Standby control register 4 (STBCR4)
Rev. 6.00 Jun. 12, 2007 Page 217 of 610
REJ09B0131-0600