English
Language : 

SH7708 Datasheet, PDF (289/633 Pages) Renesas Technology Corp – SuperH™ RISC engine
10.3.6 Pseudo-SRAM Direct Connection
When the memory type bits (DRAMTP2-0) in BCR1 are set to 001, physical space area 3
becomes pseudo-SRAM and the pseudo-SRAM interface function that allows pseudo-SRAM to be
connected directly to the SH7708 Series can be used. An interface data width of 16 or 32 bits can
be selected.
With directly connected pseudo-SRAM, the refresh signal and output enable signal are
multiplexed. The signals used for connection are CE, OE/RFSH, WE3, WE2, WE1, and WE0.
WE3 and WE2 are not used with a 16-bit data width.
As access modes, burst access using the static column access function is supported in addition to
ordinary read/write access.
Figure 10.33 shows an example of connection of 4M pseudo-SRAMs with multiplexed OE and
RFSH signals, using a 32-bit data width.
271