M32C8A Datasheet, PDF (118/372 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M32C/80 Series

M32C/8A Group
11. Interrupts
Table 11.3 Relocatable Vector Tables (2)
Interrupt Source
Vector Table Address
Address (L) to Address (H)⁽¹⁾
Software
Interrupt Number
Reference
Bus conflict detection,
Start condition detection/
Stop condition detection
(UART2)⁽³⁾
+156 to +159 (009Ch to 009Fh)
39
Serial interfaces
Bus conflict detection,
Start condition detection/
Stop condition detection
(UART3 or UART0)⁽⁴⁾
+160 to +163 (00A0h to 00A3h)
40
Bus conflict detection,
Start condition detection/
Stop condition detection
(UART4 or UART1)⁽⁴⁾
+164 to +167 (00A4h to 00A7h)
41
A/D0
+168 to +171 (00A8h to 00ABh)
42
A/D converter
Key input
+172 to +175 (00ACh to 00AFh)
43
Interrupts
Reserved space
INT instruction⁽²⁾
+176 to +255 (00B0h to 00FFh)
+0 to +3 (0000h to 0003h) to
+252 to +255 (00FCh to 00FFh)
44 to 63
0 to 63
-
Interrupts
NOTES:
1. These are the address offset from the base address set in the INTB register.
2. The I flag does not disable this interrupt.
3. In I²C mode, NACK, ACK, or start/stop condition detection can be the interrupt sources.
4. The IFSR6 bit in the IFSR register selects either UART0 or UART3. The IFSR7 bit selects either UART1 or
UART4.
Rev.1.00 Jul 15, 2007 Page 101 of 352
REJ09B0385-0100