|
SED1354 Datasheet, PDF (267/472 Pages) Epson Company – Color Graphics LCD/CRT Controller | |||
|
◁ |
Epson Research and Development
Vancouver Design Center
Page 3
WINDOWS® CE DISPLAY DRIVERS
The Windows CE display drivers are designed to support the SED1354 Color Graphics LCD/CRT
Controller running under the Microsoft Windows CE operating system. Drivers are available for 4,
8 and 16 bit-per-pixel modes.
For updated source code, visit Epson R&D on the World Wide Web at www.erd.epson.com, or
contact your Seiko Epson or Epson Electronics America sales representative.
Program Requirements
Video Controller
Display Type
Windows Version
: SED1354
: LCD or CRT
: CE Version 2.0
Example Driver Builds
Build for the Hitachi D9000 and ETMA ODO Evaluation Systems
To build a Windows CE v2.0 display driver for the Hitachi D9000 or ETMA ODO platform follow
the instructions below. The instructions assume the SDU1354-D9000 evaluation board is plugged
into slots 6 and 7 on the D9000/ODO platform, and the SEIKO EPSON common interface FPGA
(ODO.RBF) is used to interface with the SED1354.
Check to ensure that the DIP switches on the SDU1354-D9000 board are set as follows:
DIP Switch
1
2
3
4
ON
ON
OFF
OFF
1. Install Microsoft Windows NT v4.0.
2. Install Microsoft Visual C/C++ v5.0.
3. Install the Microsoft Windows CE Embedded Toolkit (ETK) by running SETUP.EXE from
the ETK compact disc #1.
4. Create a new project by following the procedure documented in âCreating a New Project
Directoryâ from the Windows CE ETK v2.0. Alternately, use the current âDEMO7â project in-
cluded with the ETK v2.0. Follow the steps below to create a âSH3 DEMO7â shortcut on the
Windows NT v4.0 desktop which uses the current âDEMO7â project:
a. Right click on the âStartâ menu on the taskbar.
b. Click on the item âOpen All Usersâ and the âStart Menuâ window will come up.
c. Click on the icon âProgramsâ.
d. Click on the icon âWindows CE Embedded Development Kitâ.
e. Drag the icon âSH3 DEMO1â onto the desktop using the right mouse button.
f. Click on âCopy Hereâ.
Windows® CE Display Drivers
Issue Date: 98/12/21
SED1354
X19A-E-001-03
|
▷ |