SED1354 Datasheet, PDF (257/472 Pages) Epson Company – Color Graphics LCD/CRT Controller

Epson Research and Development
Vancouver Design Center
Page 3
1354BMP
Installation
Usage
1354BMP demonstrates SED1354 display capabilities by rendering bitmap images on the display.
The 1354BMP display utility is designed to operate in a personal computer (PC) DOS environment
and must be configured to work with your display hardware. Consult documentation for the program
1354CFG.EXE which can be used to configure 1354BMP.
1354BMP is not supported on non-PC platforms.
Copy the file 1354BMP.EXE to a directory that is in the DOS path on your hard drive.
At the prompt, type 1354bmp bmp file [/a] [/lcd] [/crt] [/?].
Comments
Where: bmp file
/a
/lcd
/crt
/?
displays the bmp format file
automatically exits after 5 seconds
displays the image on a LCD
displays the image on a CRT
displays the Help screen
• 1354BMP only currently decodes Windows BMP format images.
• The PC must not have more than 12M bytes of memory when used with the SDU1354B0C
board.
• Follow simultaneous display guidelines for correct simultaneous display operation.
• To determine if the CRT will operate correctly when using a dual panel, refer to the “Maximum
Frame Rates” table in the SED1354 “Functional Hardware Specification,” document number
X19A-A-002-xx.
• When editing in 1354CFG with CRT enabled and panel disabled, select “Single Panel” from the
“Edit Panel Setup” submenu.
• When a CRT is enabled, the CRT settings will override the panel settings. If a panel is also used,
the CRT timing values will have to be changed to more closely match the panel's timing.
• A CRT cannot show 15 or 16 bits-per-pixel.
• Do not attach a panel with a 16-bit interface to the SED1354 when a CRT is also attached.
1354BMP Demonstration Program
Issue Date: 98/10/29
SED1354
X19A-B-006-03