English
Language : 

M16C6NK Datasheet, PDF (397/404 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES
REVISION HISTORY
M16C/6N Group (M16C/6NK, M16C/6NM) Hardware Manual
Rev. Date
1.00 Sep. 30, 2004
1.01 Nov. 01, 2004
1.10 Jul. 01, 2005
Page
–
–
3
270
271
291
–
2
3
5
13
19
39
55
78
176
207
208
209
Description
Summary
First edition issued
Revised edition issued
* Revised parts and revised contents are as follows (except for expressional change).
Table 1.2 Performance Outline of M16C/6N Group (128-pin Version: M16C/6NM)
• Interrupt: Internal interrupt source is revised from “32 sources” to “34 sources”.
Table 21.2 Recommended Operating Conditions (1)
• IOH(peak): Unit is revised from “V” to “mA”.
Table 21.3 Recommended Operating Conditions (2)
• NOTE 3: “VCC = 3.0 ± 0.3 V” is revised to “VCC = 3.3 ± 0.3 V”.
22.9.1.2 Timer A (Event Counter Mode) is revised.
Revised edition issued
* The contents of product are revised. (T/V-ver. is added.)
* Revised parts and revised contents are as follows (except for expressional change).
Table 1.1 Performance outline of M16C/6N Group (100-pin Version: M16C/6NM)
• Performance outline of T/V-ver. is added.
Table 1.2 Performance outline of M16C/6N Group (128-pin Version: M16C/6NN)
• Performance outline of T/V-ver. is added.
Table 1.3 Product List is revised. (T/V-ver. is added.)
Figure 1.2 Type No., Memory Size, and Package: “Characteristics” is added.
FIgure 4.1 SFR Information (1): The value of After Reset in CM2 Register is revised.
Figure 4.7 SFR Information (7): NOTE 1 is revised.
Figure 7.4 CM2 Register: The value of After Reset is revised.
Figure 7.13 State Transition in Normal Operation Mode: NOTE 7 is revised.
9.10 Address Match Interrupt: After of 13th line
• “Note that when using the external bus in 8-bit width, no address match interrupts
can be used for external areas.” is deleted.
Figure 14.37 (upper) SiC Register: NOTE 4 is revised.
Figure 18.6 C0MCTLj and C1MCTLj Registers
• RemActive bit: Function is revised.
• RspLock bit: Bit Name is revised.
• NOTE 2 is revised.
Figure 18.7 C0CTLR and C1CTLR Registers (upper)
• LoopBack bit: The expression of Function is revised.
• BasicCAN bit: The expression of Function is revised.
Figure 18.7 C0CTLR and C1CTLR Registers (lower)
• TSPreScale bit: Bit Symbol is revised. (“Bit1, Bit0” is deleted.)
• TSReset bit: The expression of Function is revised.
• RetBusOff bit: The expression of Function is revised.
• RXOnly bit: The expression of Function is revised.
Figure 18.8 C0STR and C1STR Registers (upper): NOTE 1 is deleted.
Figure 18.8 C0STR and C1STR Registers (lower)
• State_LoopBack bit: The expression of Function is revised.
• State_BasicCAN bit: The expression of Function is revised.
C-1