M16C6NK Datasheet, PDF (314/404 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

Under development
This document is under development and its contents are subject to change.
M16C/6N Group (M16C/6NK, M16C/6NM)
22. Electric Characteristics (Normal-ver.)
Table 22.5 Electrical Characteristics (2) ⁽¹⁾
Symbol
Parameter
Measuring Condition
ICC
Power Supply Output pins are open Mask ROM f(BCLK) = 24MHz,
Standard
Unit
Min. Typ. Max.
21 37 mA
Current
and other pins are VSS.
PLL operation,
(VCC = 3.0 to 5.5V)
No division
On-chip oscillation,
1
mA
No division
Flash Memory f(BCLK) = 24MHz,
23 39 mA
PLL operation,
No division
On-chip oscillation,
1.8
mA
No division
Flash Memory f(BCLK) = 10MHz,
15
mA
Program
VCC = 5V
Flash Memory f(BCLK) = 10MHz,
25
mA
Erase
VCC = 5V
Mask ROM f(BCLK) = 32kHz,
25
µA
Low power dissipation
mode, ROM ⁽²⁾
Flash Memory f(BCLK) = 32kHz,
25
µA
Low power dissipation
mode, RAM ⁽²⁾
f(BCLK) = 32kHz,
420
µA
Low power dissipation
mode,
Flash memory ⁽²⁾
Mask ROM On-chip oscillation,
50
µA
Flash Memory Wait mode
f(BCLK) = 32kHz,
Wait mode (3),
8.5
µA
Oscillation capacity High
f(BCLK) = 32kHz,
Wait mode (3),
3.0
µA
Oscillation capacity Low
Stop mode,
Topr = 25°C
0.8 3.0 µA
NOTES:
1. Referenced to VCC = 3.0 to 5.5V, VSS = 0V at Topr = –40 to 85°C, f(BCLK) = 24MHz unless otherwise specified.
2. This indicates the memory in which the program to be executed exists.
3. With one timer operated using fC32.
Rev.2.00 Nov 28, 2005 page 296 of 378
REJ09B0124-0200