MC912DG128ACPVE Datasheet, PDF (359/478 Pages) Freescale Semiconductor, Inc – Upward compatible with M68HC11 instruction set

Freescale Semiconductor, Inc.
MSCAN Controller
Programmer’s Model of Control Registers
RERRIE — Receiver Error Passive Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A receiver error passive status event will result in an error
interrupt.
TERRIE — Transmitter Error Passive Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A transmitter error passive status event will result in an error
interrupt.
BOFFIE — BUSOFF Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A BUSOFF event will result in an error interrupt.
OVRIE — Overrun Interrupt Enable
0 = No interrupt will be generated from this event.
1 = An overrun event will result in an error interrupt.
RXFIE — Receiver Full Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A receive buffer full (successful message reception) event will
result in a receive interrupt.
NOTE: The CRIER register is held in the reset state if the SFTRES bit in CMCR0
is set.
MC68HC912DT128A — Rev 4.0
MOTOROLA
MSCAN Controller
For More Information On This Product,
Go to: www.freescale.com
Technical Data
359