MC912DG128ACPVE Datasheet, PDF(357/478 Page) Freescale Semiconductor, Inc – Upward compatible with M68HC11 instruction set

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MC912DG128ACPVE Datasheet, PDF (357/478 Pages) Freescale Semiconductor, Inc – Upward compatible with M68HC11 instruction set

◁

Freescale Semiconductor, Inc.

MSCAN Controller

Programmerâs Model of Control Registers

TWRNIF â Transmitter Warning Interrupt Flag

This bit will be set when the msCAN12 goes into warning status due

to the Transmit Error counter (TEC) exceeding 96 and neither one of

the Error interrupt flags or the Bus-Off interrupt flag is set(1). If not

masked, an Error interrupt is pending while this flag is set.

0 = No transmitter warning status has been reached.

1 = msCAN12 went into transmitter warning status.

RERRIF â Receiver Error Passive Interrupt Flag

This bit will be set when the msCAN12 goes into error passive status

due to the Receive Error counter (REC) exceeding 127 and the Bus-

Off interrupt flag is not set(2). If not masked, an Error interrupt is

pending while this flag is set.

0 = No receiver error passive status has been reached.

1 = msCAN12 went into receiver error passive status.

TERRIF â Transmitter Error Passive Interrupt Flag

This bit will be set when the msCAN12 goes into error passive status

due to the Transmit Error counter (TEC) exceeding 127 and the Bus-

Off interrupt flag is not set(3). If not masked, an Error interrupt is

pending while this flag is set.

0 = No transmitter error passive status has been reached.

1 = msCAN12 went into transmitter error passive status.

BOFFIF â BUSOFF Interrupt Flag

This bit will be set when the msCAN12 goes into BUSOFF status, due

to the Transmit Error counter exceeding 255. It cannot be cleared

before the msCAN12 has monitored 128*11 consecutive recessive

bits on the bus. If not masked, an Error interrupt is pending while this

flag is set.

0 = No BUSOFF status has been reached.

1 = msCAN12 went into BUSOFF status.

1. TWRNIF = (96 < TEC) & RERRIF& TERRIF & BOFFIF

2. RERRIF = (128 < REC < 255) & BOFFIF

3. TERRIF = (128 < TEC < 255) & BOFFIF

MC68HC912DT128A â Rev 4.0

MOTOROLA

MSCAN Controller

For More Information On This Product,

Go to: www.freescale.com

Technical Data

357

▷