F81867 Datasheet, PDF (282/315 Pages) Feature Integration Technology Inc. – 6 UARTs μSuper IO With 128 Bytes FIFO and Power Saving Functions

3-2 GP5_DELAY_TIME R/W 5VSB
0 GP5_REP_TIME R/W 5VSB
F81867
0
The delay time for repeat make code could be user defined. μC reads this
register to determine the delay time.
The repeat time for repeat make code could be user defined. μC reads this
0 _{register to determine the delay time.}
GPIO8 Scan Code 6 Control Register ⎯ offset BEh
Bit
Name
R/W Reset Default
Description
7
GP6_CTRL_EN R/W 5VSB 0 Set “1” will assert a left “Ctrl” key code first when scan code event occurs.
6
GP6_ALT_EN R/W 5VSB 0 Set “1” will assert a left “Alt” key code first when scan code event occurs.
5 GP6_SHIFT_EN R/W 5VSB 0 Set “1” will assert a left “Shift” key code first when scan code event occurs.
Set “1” will assert a left pre-code first when scan code 0 event occurs. When
4
GP6_PRE_EN R/W 5VSB 0 multiple keys are enabled, the sequence is “Ctrl” Æ “Alt” Æ “Shift” Æ
Pre-code Æ Make/Break code.
3-2 GP6_DELAY_TIME R/W 5VSB
0
The delay time for repeat make code could be user defined. μC reads this
register to determine the delay time.
The repeat time for repeat make code could be user defined. μC reads this
0
GP6_REP_TIME R/W 5VSB
0 _{register to determine the delay time.}
GPIO8 Scan Code 7 Control Register ⎯ offset BFh
Bit
Name
R/W Reset Default
Description
7
GP7_CTRL_EN R/W 5VSB 0 Set “1” will assert a left “Ctrl” key code first when scan code event occurs.
6
GP7_ALT_EN R/W 5VSB 0 Set “1” will assert a left “Alt” key code first when scan code event occurs.
5 GP7_SHIFT_EN R/W 5VSB 0 Set “1” will assert a left “Shift” key code first when scan code event occurs.
Set “1” will assert a left pre-code first when scan code 0 event occurs. When
4
GP7_PRE_EN R/W 5VSB 0 multiple keys are enabled, the sequence is “Ctrl” Æ “Alt” Æ “Shift” Æ
Pre-code Æ Make/Break code.
3-2 GP7_DELAY_TIME R/W 5VSB
0
The delay time for repeat make code could be user defined. μC reads this
register to determine the delay time.
The repeat time for repeat make code could be user defined. μC reads this
0
GP7_REP_TIME R/W 5VSB
0 _{register to determine the delay time.}
GPIO7 Function Select 1 Register ⎯ offset ACh
Bit
Name
R/W Reset Default
Description
7-6 GPIO73_FUNC_SEL R/W 5VSB
0
These two bits are used for host and μC communication. μC could used
these two bits to decide which function GOPIO73 is.
5-4 GPIO72_FUNC_SEL R/W 5VSB
0 ^{These two bits are used for host and μC communication. μC could used}
these two bits to decide which function GOPIO72 is.
3-2 GPIO71_FUNC_SEL R/W 5VSB
0
These two bits are used for host and μC communication. μC could used
these two bits to decide which function GOPIO71 is.
1-0 GPIO70_FUNC_SEL R/W 5VSB
These two bits are used for host and μC communication. μC could used
0 _{these two bits to decide which function GOPIO70 is.}
GPIO7 Function Select Register ⎯ offset ADh
Bit
Name
R/W Reset Default
Description
7-6 GPIO77_FUNC_SEL R/W 5VSB
0
These two bits are used for host and μC communication. μC could used
these two bits to decide which function GOPIO77 is.
282
Dec, 2011
V0.12P