F81867 Datasheet, PDF (19/315 Pages) Feature Integration Technology Inc. – 6 UARTs μSuper IO With 128 Bytes FIFO and Power Saving Functions

F81867
An open drain output.
DCD6#
IN_st,5v
Data Carrier Detect. An active low signal indicates
the modem or data set has detected a data carrier.
GPIO54
I/OOD_{14st, 5v}
General Purpose IO.
Direction of the head step motor. An open drain
output.
DIR#
OD_14,5v
Logic 1 = outward motion
13
3VCC
Logic 0 = inward motion
Ring Indicator. An active low signal indicates that a
RI6#
IN_st,5v
ring signal is being received from the modem or data
set.
GPIO55
I/OOD_{14st, 5v}
General Purpose IO.
Step output pulses. This active low open drain output
14
STEP#
OD_14,5v
3VCC
produces a pulse to move the head to another track.
CTS6#
IN_st,5v
Clear To Send is the modem control input.
GPIO56
I/OOD_{14st, 5v}
General Purpose IO.
Head select. This open drain output determines
which disk drive head is active.
15
HDSEL#
OD_14,5v
3VCC ^{Logic 1 = side 0}
Logic 0 = side 1
UART Data Terminal Ready. An active low signal
DTR6#
O₁₄
informs the modem or data set that controller is ready
to communicate.
GPIO57
I/OOD_{14st, 5v}
General Purpose IO.
WGATE#
OD_14,5v
Write enable. An open drain output.
16
3VCC _{Data Set Ready. An active low signal indicates the}
DSR6#
IN_st,5v
modem or data set is ready to establish a
communication link and transfer data to the UART.
GPIO60
I/OOD_{12st, 5v}
General Purpose IO.
RDATA#
IN_st,5v
The read data input signal from the FDD.
Data Carrier Detect. An active low signal indicates
DCD5#
IN_st,5v
the modem or data set has detected a data carrier.
17
3VCC
PWM0 Output where its frequency range is
PWM 0
OOD_{14st, 5v}
183Hz~46.875KHz. It can support various
applications such as manual fan control, and
backlight brightness control.
GPIO61
I/OOD_{12st, 5v}
General Purpose IO.
Track 0. This Schmitt-triggered input from the disk
TRK0#
IN_st,5v
drive is active low when the head is positioned over
the outermost track.
18
3VCC ^{Ring Indicator. An active low signal indicates that a}
RI5#
IN_st,5v
ring signal is being received from the modem or data
set.
PWM1 Output where its frequency range is
PWM 1
OOD₁₂
183Hz~46.875KHz. It can support various
applications such as manual fan control, and
19
Dec, 2011
V0.12P