F81867 Datasheet, PDF (229/315 Pages) Feature Integration Technology Inc. – 6 UARTs μSuper IO With 128 Bytes FIFO and Power Saving Functions

1-0 RAW_DATA_H
R 5VSB
F81867
0 The highest two bits of HM converting raw data
Temperature Register
Temperature PME# Enable Register ⎯ Offset 60h
Bit
Name
R/W Reset Default
7
Reserved
R/W
-
0 Reserved
Description
6 EN_ T2_OVT_PME R/W 5VSB
If set this bit to 1, PME# signal will be issued when TEMP2
0
exceeds OVT setting.
5 EN_ T1_OVT_PME R/W 5VSB
4
EN_ T0_
OVT_PME
R/W 5VSB
3
Reserved
R/W
-
If set this bit to 1, PME# signal will be issued when TEMP1
0
exceeds OVT setting.
0
If set this bit to 1, PME# signal will be issued when TEMP0
exceeds OVT setting.
0 Reserved
2 EN_ T2_EXC_PME R/W 5VSB
If set this bit to 1, PME# signal will be issued when TEMP2
0
exceeds high limit setting.
1 EN_ T1_EXC_PME R/W 5VSB
0 EN_ T0_EXC_PME R/W 5VSB
If set this bit to 1, PME# signal will be issued when TEMP1
0
exceeds high limit setting.
0
If set this bit to 1, PME# signal will be issued when TEMP0
exceeds high limit setting.
Temperature Interrupt Status Register ⎯ Offset 61h
Bit
Name
R/W Reset Default
7
Reserved
R/W
-
0 Reserved
Description
This bit gets 1 to indicate TEMP2 temperature sensor has
6 T2_OVT _STS R/W 3VCC
0 exceeded OVT limit or below the “OVT limit –hysteresis”. Write
1 to clear this bit, write 0 to ignore.
This bit gets 1 to indicate TEMP1 temperature sensor has
5 T1_OVT _STS R/W 3VCC
0 exceeded OVT limit or below the “OVT limit –hysteresis”. Write
4
T0_OVT _STS R/W 3VCC
3
Reserved
R/W
-
1 to clear this bit, write 0 to ignore.
A one indicates TEMP0 temperature sensor has exceeded
0 OVT limit or below the “OVT limit –hysteresis”. Write 1 to clear
this bit, write 0 will be ignored.
0 Reserved
This bit gets 1 to indicate TEMP2 temperature sensor has
2 T2_EXC _STS R/W 3VCC
0 exceeded high limit or below the “high limit –hysteresis” limit.
Write 1 to clear this bit, write 0 to ignore.
This bit gets 1 to indicate TEMP1 temperature sensor has
1 T1_EXC _STS R/W 3VCC
0 exceeded high limit or below the “high limit –hysteresis” limit.
0
T0_EXC _STS R/W 3VCC
Write 1 to clear this bit, write 0 to ignore.
A one indicates TEMP0 temperature sensor has exceeded
0 high limit or below the “high limit –hysteresis” limit. Write 1 to
clear this bit, write 0 will be ignored.
229
Dec, 2011
V0.12P