MC68LC040RC25A Datasheet, PDF (397/442 Pages) Freescale Semiconductor, Inc – M68040 Users Manual

Freescale Semiconductor, Inc.
APPENDIX C
MC68040V AND MC68EC040V
The MC68040V and MC68EC040V are Motorola’s 3.3 volt, static versions of the
MC68040 third-generation, M68000-compatible, high-performance, 32-bit microprocessor.
They require a 3.3V power supply providing over 50 percent reduction in power
consumption compared to a 5.0V device. The maximum power used at 3.3 volts is 1.5
watts at an operating frequency of 33 MHz. They also have a low-power stop mode. Once
in this state, both devices remain quiescent, consuming less than 330 µW of power. The
low-power usage of these microprocessors makes them an ideal choice for portable
computing and power constrained applications.
The MC68040V programming model, data formats and types, instruction set, caches, and
MMUs are the same as those described for the MC68LC040 in Appendix A MC68LC040.
The MC68EC040V programming model, data formats and types, and instruction set are
the same as those described for the MC68EC040 in Appendix B MC68EC040. However,
both devices contain additional features:
• For the MC68040V, all differences that exist between the MC68LC040 and the
MC68040, as described in Appendix A MC68LC040, also apply to the MC68040V.
For the MC68EC040V, all differences that exist between the MC68EC040 and the
MC68040, as described in Appendix B MC68EC040, also apply to the
MC68EC040V.
• Both devices operate to 0 Hz and can accept 3.3V or 5V input.
• Both devices have a new processor status state, low-power stop mode, indicated
when PST(3–0) = $6.
• There is no PCLK or TRST pin on either device.
• Both devices provide three new pins, system clock disable (SCD), low frequency
operation (LFO), and loss of clock (LOC).
C.1 ADDITIONAL SIGNALS
Table C-1 lists the additional signals and Figure C-1 illustrates the functional signal groups
of the MC68040V and MC68EC040V.
MOTOROLA
M68040 USER’S MANUAL
C- 1
For More Information On This Product,
Go to: www.freescale.com