PIC18F97J60 Datasheet, PDF (67/474 Pages) Microchip Technology – 64/80/100-Pin, High-Performance, 1 Mbit Flash Microcontrollers with Ethernet

PIC18F97J60 FAMILY
TABLE 4-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via WDT
or Interrupt
MAIPGH
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
-000 0000
-000 0000
-uuu uuuu
MAIPGL
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
-000 0000
-000 0000
-uuu uuuu
MABBIPG PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
-000 0000
-000 0000
-uuu uuuu
MACON4
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
-000 --00
-000 --00
-uuu --uu
MACON3
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MACON1
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
---0 0000
---0 0000
---u uuuu
EPAUSH
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0001 0000
0001 0000
000u uuuu
EPAUSL
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
EFLOCON PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
---- -000
---- -000
---- -uuu
MISTAT
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
---- 0000
---- 0000
---- uuuu
MAADR2
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MAADR1
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MAADR4
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MAADR3
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MAADR6
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
MAADR5
PIC18F6XJ6X PIC18F8XJ6X PIC18F9XJ6X
0000 0000
0000 0000
uuuu uuuu
Legend:
Note 1:
2:
3:
4:
u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are updated with
the current value of the PC. The STKPTR is modified to point to the next location in the hardware stack.
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt vector
(0008h or 0018h).
One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
See Table 4-1 for Reset value for specific condition.
© 2006 Microchip Technology Inc.
Advance Information
DS39762A-page 65