PIC18F97J60 Datasheet, PDF (424/474 Pages) Microchip Technology – 64/80/100-Pin, High-Performance, 1 Mbit Flash Microcontrollers with Ethernet

PIC18F97J60 FAMILY
27.2 DC Characteristics: Power-Down and Supply Current
PIC18F97J60 Family (Industrial) (Continued)
PIC18F97J60 Family
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
Param
No.
Device
Typ Max Units
Conditions
Module Differential Currents (ΔIWDT, ΔIOSCB, ΔIAD, ΔIETH)
D022
(ΔIWDT)
Watchdog Timer TBD TBD μA
TBD TBD μA
-40°C
+25°C
TBD TBD μA
+85°C
TBD TBD μA
-40°C
TBD TBD μA
+25°C
TBD TBD μA
+85°C
TBD TBD μA
-40°C
TBD TBD μA
+25°C
TBD TBD μA
+85°C
D025
(ΔIOSCB)
Timer1 Oscillator TBD TBD μA
TBD TBD μA
-40°C
+25°C
TBD TBD μA
+85°C
TBD TBD μA
-40°C
TBD TBD μA
+25°C
TBD TBD μA
+85°C
TBD TBD μA
-40°C
TBD TBD μA
+25°C
TBD TBD μA
+85°C
D026
(ΔIAD)
A/D Converter
TBD TBD
μA -40°C to +85°C
VDD = 2.0V,
VDDCORE = 2.0V,
ENVREG = 0
VDD = 2.5V,
VDDCORE = 2.5V,
ENVREG = 0
VDD = 3.3V,
ENVREG = 1
VDD = 2.0V,
VDDCORE = 2.0V,
ENVREG = 0
VDD = 2.5V,
VDDCORE = 2.5V,
ENVREG = 0
VDD = 3.3V,
ENVREG = 1
VDD = 2.0V,
VDDCORE = 2.0V,
ENVREG = 0
32 kHz on Timer1⁽³⁾
32 kHz on Timer1⁽³⁾
32 kHz on Timer1⁽³⁾
D027
ΔIETH
Legend:
Note 1:
2:
3:
TBD TBD
VDD = 2.5V,
μA -40°C to +85°C VDDCORE = 2.5V,
ENVREG = 0
A/D on, not converting
TBD TBD
μA -40°C to +85°C VDD = 3.3V,
ENVREG = 1
Ethernet Module
140
TBD
mA -40°C to +85°C
VDD = 3.3V,
ENVREG = 1
Includes current sunk
through TPOUT+ and TPOUT-,
LEDA and LEDB disabled
TBD = To Be Determined
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta
current disabled (such as WDT, Timer1 oscillator, etc.).
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
DS39762A-page 422
Advance Information
© 2006 Microchip Technology Inc.