MC68HC11KW1 Datasheet, PDF (224/238 Pages) Motorola, Inc – High-density complementary metal oxide semiconductor HCMOS) microcontroller unit

C.2
MMDS11 — Motorola modular development system
The MMDS11 is an emulator system that provides a bus state analyser and real-time memory
windows. The unit’s integrated design environment includes an editor, an assembler, user
interface and source-level debug. A complete MMDS11 consists of:
• A station module — the metal MMDS11 enclosure, containing the control board and the
internal power supply. Most system cables connect to the MMDS11 station module. (The cable
to an optional target system, however, runs through an aperture in the station module
enclosure to connect directly to the emulator module).
• An emulator module (EM) — such as the EM11KW1: a printed circuit board that enables
system functionality for a specific set of MCUs. The EM fits into the station module through a
sliding panel in the enclosure top. The EM has a connector for the target cable.
• Two logic clip cable assemblies — twisted pair cables that connect the station module to your
target system, a test fixture, a clock or any other circuitry useful for evaluation or analysis. One
end of each cable assembly has a moulded connector, which fits into station module pod A or
pod B. Leads at the other end of the cable terminate in female probe tips. Ball clips come with
the cables.
• A 9-lead RS-232 serial cable — the cable that connects the station module to the host
computer’s RS-232 port.
C.3
SPGMR11 — Serial peripheral system
The SPGMR11 is an economical tool for programming M68HC11 MCUs. The system consists of
the M68SPGMR11 unit and a programming module which adapts the SPGMR11 to the
appropriate MCU and package type. For the MC68HC11KW1, the programming module can be
ordered as M68PA11KW1PU100 for the 100-pin packaged device.
C
DEVELOPMENT SYSTEMS
MC68HC11KW1
C-2