SH7101 Datasheet, PDF (289/486 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

8. Multi-Function Timer Pulse Unit (MTU)
Initial
Bit Bit Name value R/W
Description
15
POE3F 0
R/(W)*
POE3 Flag
This flag indicates that a high impedance request has
been input to the POE3 pin
[Clearing condition]
• By writing 0 to POE3F after reading a POE3F = 1
[Setting condition]
• When the input set by ICSR1 bits 7 and 6 occurs at
the POE3 pin
14
POE2F 0
R/(W)*
POE2 Flag
This flag indicates that a high impedance request has
been input to the POE2 pin
[Clearing condition]
• By writing 0 to POE2F after reading a POE2F = 1
[Setting condition]
• When the input set by ICSR1 bits 5 and 4 occurs at
the POE2 pin
13
POE1F 0
R/(W)*
POE1 Flag
This flag indicates that a high impedance request has
been input to the POE1 pin
[Clearing condition]
• By writing 0 to POE1F after reading a POE1F = 1
[Setting condition]
• When the input set by ICSR1 bits 3 and 2 occurs at
the POE1 pin
12
POE0F 0
R/(W)*
POE0 Flag
This flag indicates that a high impedance request has
been input to the POE0 pin
[Clearing condition]
• By writing 0 to POE0F after reading a POE0F = 1
[Setting condition]
• When the input set by ICSR1 bits 1 and 0 occurs at
the POE0 pin
Rev.2.00 Sep. 27, 2007 Page 255 of 448
REJ09B0394-0200