SH7101 Datasheet, PDF (249/486 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

8. Multi-Function Timer Pulse Unit (MTU)
8.7.14 Reset Sync PWM Mode Buffer Operation and Compare Match Flag
When setting buffer operation for reset sync PWM mode, set the BFA and BFB bits of TMDR_4
to 0. The TIOC4C pin will be unable to produce its waveform output if the BFA bit of TMDR_4 is
set to 1.
In reset sync PWM mode, the channel 3 and channel 4 buffers operate in accordance with the BFA
and BFB bit settings of TMDR_3. For example, if the BFA bit of TMDR_3 is set to 1, TGRC_3
functions as the buffer register for TGRA_3. At the same time, TGRC_4 functions as the buffer
register for TRGA_4.
The TGFC bit and TGFD bit of TSR_3 and TSR_4 are not set when TGRC_3 and TGRD_3 are
operating as buffer registers.
Figure 8.80 shows an example of operations for TGR_3, TGR_4, TIOC3, and TIOC4, with
TMDR_3's BFA and BFB bits set to 1, and TMDR_4's BFA and BFB bits set to 0.
TGRA_3
TGRC_3
TCNT3
Point a
TGRB_3, TGRA_4,
TGRB_4
TGRD_3, TGRC_4, ^{Point b}
TGRD_4
H'0000
Buffer transfer with
compare match A3
TGRA_3,
TGRC_3
TGRB_3, TGRD_3,
TGRA_4, TGRC_4,
TGRB_4, TGRD_4
TIOC3A
TIOC3B
TIOC3D
TIOC4A
TIOC4C
TIOC4B
TIOC4D
TGFC
TGFD
Not set
Not set
Figure 8.80 Buffer Operation and Compare-Match Flags in Reset Sync PWM Mode
Rev.2.00 Sep. 27, 2007 Page 215 of 448
REJ09B0394-0200