C508_01 Datasheet, PDF (113/267 Pages) Infineon Technologies AG – 8-Bit CMOS Microcontroller

C508
On-Chip Peripheral Components
Using the CTRAP input signal of the C508, the compare outputs can be put immediately
into their state as defined in COTRAP register.
The CCU unit has four main interrupt sources with their specific interrupt vectors.
Interrupts can be generated at the Compare Timer 1 period match or count-change
events, at the Compare Timer 2 period match event, at a CAPCOM Compare match or
Capture event, and at a CAPCOM emergency event. An emergency event occurs if an
active CTRAP signal is detected or if an error condition in block commutation mode is
detected. All interrupt sources can be enabled/disabled individually.
User’s Manual
6-48
2001-05