MC68HC708MP16 Datasheet, PDF (88/398 Pages) Freescale Semiconductor, Inc – Microcontrollers

System Integration Module (SIM)
7.4.2 Active Resets from Internal Sources
All internal reset sources actively pull the RST pin low for 32 CGMXCLK
cycles to allow resetting of external peripherals. The internal reset signal
IRST continues to be asserted for an additional 32 cycles. (See Figure
7-5.) An internal reset can be caused by an illegal address, illegal
opcode, COP timeout, LVI, or POR. (See Figure 7-6.) Note that for LVI
or POR resets, the SIM cycles through 4096 CGMXCLK cycles during
which the SIM forces the RST pin low. The internal reset signal then
follows the sequence from the falling edge of RST shown in Figure 7-5.
IRST
RST
CGMXCLK
IAB
RST PULLED LOW BY MCU
32 CYCLES
32 CYCLES
VECTOR HIGH
Figure 7-5. Internal Reset Timing
The COP reset is asynchronous to the bus clock.
ILLEGAL ADDRESS RST
ILLEGAL OPCODE RST
COPRST
LVI
POR
INTERNAL RESET
Figure 7-6. Sources of Internal Reset
The active reset feature allows the part to issue a reset to peripherals
and other chips within a system built around the MCU.
Technical Data
88
System Integration Module (SIM)
MC68HC708MP16 — Rev. 3.1
Freescale Semiconductor