MC68HC708MP16 Datasheet, PDF (182/398 Pages) Freescale Semiconductor, Inc – Microcontrollers

Pulse Width Modulator for Motor Control (PWMMC)
FINT3 — Fault 3 Interrupt Enable
This read/write bit allows the CPU interrupt caused by faults on fault
pin 3 to be enabled. The fault protection circuitry is independent of this
bit and will always be active. If a fault is detected, the PWM pins will
still be disabled according to the disable mapping register.
1 = Fault pin 3 will cause CPU interrupts
0 = Fault pin 3 will not cause CPU interrupts
FMODE4 — Fault Mode Selection for Fault Pin 4 (Automatic versus
Manual Mode)
This read/write bit allows the user to select between automatic and
manual mode faults. For further description of each mode, see 9.7
Fault Protection.
1 = Automatic mode
0 = Manual mode
FINT4 — Fault 4 Interrupt Enable
This read/write bit allows the CPU interrupt caused by faults on fault
pin 4 to be enabled. The fault protection circuitry is independent of this
bit and will always be active. If a fault is detected, the PWM pins will
still be disabled according to the disable mapping register.
1 = Fault pin 4 will cause CPU interrupts
0 = Fault pin 4 will not cause CPU interrupts
Technical Data
182
MC68HC708MP16 — Rev. 3.1
Pulse Width Modulator for Motor Control (PWMMC) Freescale Semiconductor