MC68HC708MP16 Datasheet, PDF (395/398 Pages) Freescale Semiconductor, Inc – Microcontrollers

Glossary
VCO — See voltage-controlled oscillator.
vector — A memory location that contains the address of the beginning
of a subroutine written to service an interrupt or reset.
voltage-controlled oscillator (VCO) — A circuit that produces an
oscillating output signal of a frequency that is controlled by a dc
voltage applied to a control input.
waveform — A graphical representation in which the amplitude of a
wave is plotted against time.
wired-OR — Connection of circuit outputs so that if any output is high,
the connection point is high.
word — A set of two bytes (16 bits).
write — The transfer of a byte of data from the CPU to a memory
location.
X — The lower byte of the index register (H:X) in the CPU08.
Z — The zero bit in the condition code register of the CPU08. The
CPU08 sets the zero bit when an arithmetic operation, logical
operation, or data manipulation produces a result of $00.
MC68HC708MP16 — Rev. 3.1
Freescale Semiconductor
Glossary
Technical Data
395