S9S12XS256J0CAL Datasheet, PDF (686/738 Pages) Freescale Semiconductor, Inc – Microcontrollers

Electrical Characteristics
A.5 Output Loads
A.5.1 Resistive Loads
The voltage regulator is intended to supply the internal logic and oscillator. It allows no external DC loads.
A.5.2 Capacitive Loads
The capacitive loads are specified in Table A-21. Ceramic capacitors with X7R dielectricum are required.
Table A-21. S12XS family - Capacitive Loads
Num
Characteristic
1 VDD/VDDF external capacitive load
3 VDDPLL external capacitive load
Symbol
C_DDext
C_DDPLLext
Min Recommended Max Unit
176
220
264
nF
80
220
264
nF
A.5.3 Chip Power-up and Voltage Drops
LVI (low voltage interrupt), POR (power-on reset) and LVRs (low voltage reset) handle chip power-up or
drops of the supply voltage. Their function is shown in Figure A-2 .
V
V_LVID
V_LVIA
V_LVRXD
V_LVRXA
V_DDX
V_DD
V_PORD
LVI
POR
t
LVI enabled ^{LVI disabled due to LVR}
LVRX
686
Figure A-2. S12XS family - Chip Power-up and Voltage Drops (not scaled)
S12XS Family Reference Manual, Rev. 1.13
Freescale Semiconductor