S9S12XS256J0CAL Datasheet, PDF (315/738 Pages) Freescale Semiconductor, Inc – Microcontrollers

Freescale’s Scalable Controller Area Network (S12MSCANV3)
Table 11-18. CANIDAC Register Field Descriptions
Field
Description
5-4
Identifier Acceptance Mode — The CPU sets these flags to define the identifier acceptance filter organization
IDAM[1:0] (see Section 11.4.3, “Identifier Acceptance Filter”). Table 11-19 summarizes the different settings. In filter closed
mode, no message is accepted such that the foreground buffer is never reloaded.
2-0
Identifier Acceptance Hit Indicator — The MSCAN sets these flags to indicate an identifier acceptance hit (see
IDHIT[2:0] Section 11.4.3, “Identifier Acceptance Filter”). Table 11-20 summarizes the different settings.
IDAM1
0
0
1
1
Table 11-19. Identifier Acceptance Mode Settings
IDAM0
0
1
0
1
Identifier Acceptance Mode
Two 32-bit acceptance filters
Four 16-bit acceptance filters
Eight 8-bit acceptance filters
Filter closed
Table 11-20. Identifier Acceptance Hit Indication
IDHIT2
0
0
0
0
1
1
1
1
IDHIT1
0
0
1
1
0
0
1
1
IDHIT0
0
1
0
1
0
1
0
1
Identifier Acceptance Hit
Filter 0 hit
Filter 1 hit
Filter 2 hit
Filter 3 hit
Filter 4 hit
Filter 5 hit
Filter 6 hit
Filter 7 hit
The IDHITx indicators are always related to the message in the foreground buffer (RxFG). When a
message gets shifted into the foreground buffer of the receiver FIFO the indicators are updated as well.
11.3.2.13 MSCAN Reserved Register
This register is reserved for factory testing of the MSCAN module and is not available in normal system
operating modes.
S12XS Family Reference Manual Rev. 1.13
Freescale Semiconductor
315