S9S12XS256J0CAL Datasheet, PDF (477/738 Pages) Freescale Semiconductor, Inc – Microcontrollers

Timer Module (TIM16B8CV2)
NOTE
The newly selected prescale factor will not take effect until the next
synchronized edge where all prescale counter stages equal zero.
16.3.2.12 Main Timer Interrupt Flag 1 (TFLG1)
Module Base + 0x000E
7
R
C7F
W
6
C6F
5
C5F
4
C4F
3
C3F
2
C2F
1
C1F
0
C0F
Reset
0
0
0
0
0
0
0
0
Figure 16-20. Main Timer Interrupt Flag 1 (TFLG1)
Read: Anytime
Write: Used in the clearing mechanism (set bits cause corresponding bits to be cleared). Writing a zero
will not affect current status of the bit.
Table 16-16. TRLG1 Field Descriptions
Field
7:0
C[7:0]F
Description
Input Capture/Output Compare Channel “x” Flag — These flags are set when an input capture or output
compare event occurs. Clearing requires writing a one to the corresponding flag bit while TEN or PAEN is set to
one.
When TFFCA bit in TSCR register is set, a read from an input capture or a write into an output compare channel
(0x0010–0x001F) will cause the corresponding channel flag CxF to be cleared.
16.3.2.13 Main Timer Interrupt Flag 2 (TFLG2)
Module Base + 0x000F
7
6
5
4
3
2
1
0
R
0
0
0
0
0
0
0
TOF
W
Reset
0
0
0
0
0
0
0
0
Unimplemented or Reserved
Figure 16-21. Main Timer Interrupt Flag 2 (TFLG2)
TFLG2 indicates when interrupt conditions have occurred. To clear a bit in the flag register, write the bit
to one while TEN bit of TSCR1 or PAEN bit of PACTL is set to one.
Read: Anytime
Write: Used in clearing mechanism (set bits cause corresponding bits to be cleared).
Any access to TCNT will clear TFLG2 register if the TFFCA bit in TSCR register is set.
S12XS Family Reference Manual Rev. 1.13
Freescale Semiconductor
477