S9S12XS256J0CAL Datasheet, PDF (275/738 Pages) Freescale Semiconductor, Inc – Microcontrollers

Analog-to-Digital Converter (ADC12B16CV1)
10.2 Signal Description
This section lists all inputs to the ADC12B16C block.
10.2.1 Detailed Signal Descriptions
10.2.1.1 ANx (x = 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
This pin serves as the analog input Channel x. It can also be configured as digital port or external trigger
for the ATD conversion.
10.2.1.2 ETRIG3, ETRIG2, ETRIG1, ETRIG0
These inputs can be configured to serve as an external trigger for the ATD conversion.
Refer to device specification for availability and connection of these inputs!
10.2.1.3 V_RH, V_RL
V_RH is the high reference voltage, V_RL is the low reference voltage for ATD conversion.
10.2.1.4 V_DDA, V_SSA
These pins are the power supplies for the analog circuitry of the ADC12B16C block.
10.3 Memory Map and Register Definition
This section provides a detailed description of all registers accessible in the ADC12B16C.
10.3.1 Module Memory Map
Figure 10-3 gives an overview on all ADC12B16C registers.
NOTE
Register Address = Base Address + Address Offset, where the Base Address
is defined at the MCU level and the Address Offset is defined at the module
level.
S12XS Family Reference Manual, Rev. 1.13
Freescale Semiconductor
275