English
Language : 

XRT79L71_1 Datasheet, PDF (366/434 Pages) Exar Corporation – 1-CHANNEL DS3/E3 ATM UNI/PPP/CLEAR-CHANNEL FRAMER IC -
XRT79L71
1-CHANNEL DS3/E3 ATM UNI/PPP/CLEAR-CHANNEL FRAMER IC - REGISTER/MAP DESCRIPTION
REV. 1.0.0
Transmit ATM Cell Processor Block - Transmit Test Cell Header Byte - Byte 4 (Address = 0x1F23)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Transmit Test Cell Header Byte 4 [7:0]
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
0
0
0
0
0
0
0
0
BIT NUMBER
NAME
7-0
Transmit Test Cell
Header Byte 4[7:0]
TYPE
R/W
DESCRIPTION
Receive Test Cell Header Byte 4:
These READ/WRITE register bits along with that in the Transmit
ATM Cell Processor Block - Transmit Cell Header Byte - Bytes 1
through 3 permit the user to define the headers of test cells that
the Transmit Test Cell Generator will generate.
This particular register byte permits the user to define the con-
tents of Header Byte # 4.
NOTE: These register bits are only active if the Transmit Test
Cell Generator has been enabled.
Transmit ATM Cell Processor Block - Transmit ATM Cell Counter - Byte 3 (Address = 0x1F28)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Transmit ATM Cell Count[31:24]
RUR
RUR
RUR
RUR
RUR
RUR
RUR
RUR
0
0
0
0
0
0
0
0
BIT NUMBER
NAME
7-0
Transmit ATM Cell
Count[31:24]
TYPE
RUR
DESCRIPTION
Transmit ATM Cell Count - Byte 3[31:24]:
This RESET-upon-READ register, along with the Transmit ATM
Cell Count - Bytes 2 through 0 registers, contain a 32-bit value
for the number of User/Valid cells that have been transmitted by
the Transmit ATM Cell Processor block.
This particular register contains the MSB (Most Significant Byte)
value for this 32-bit expression.
NOTES:
1. The contents within these registers include all of the
following: All ATM cells that have been read out from
the TxFIFO, or the Transmit Cell Insertion Buffer.
2. The contents of these registers do not include the
number of Idle Cells that have been generated by the
Transmit ATM Cell Processor block.
3. If the number of Cells reaches the value "0xFFFFFFFF"
then these registers will saturate to and remain at this
value (e.g., it will NOT overflow to "0x00000000").
357