TDA3MV Datasheet, PDF (51/256 Pages) Texas Instruments – TDA3x SoC for Advanced Driver Assistance Systems (ADAS) 15mm Package (ABF) Silicon Revision 2.0

www.ti.com
TDA3MV, TDA3MA
TDA3LX, TDA3LA
SPRS964C – JUNE 2016 – REVISED JULY 2017
4.4 Signal Descriptions
Many signals are available on multiple pins, according to the software configuration of the pin multiplexing
options.
1. SIGNAL NAME: The name of the signal passing through the pin.
NOTE
The subsystem multiplexing signals are not described in Table 4-2 and Table 4-3.
2. DESCRIPTION: Description of the signal
3. TYPE: Signal direction and type:
– I = Input
– O = Output
– IO = Input or output
– D = Open Drain
– DS = Differential
– A = Analog
– PWR = Power
– GND = Ground
4. BALL: Associated ball(s) bottom
NOTE
For more information, see the Control Module / Control Module Register Manual section of
the device TRM.
4.4.1 Video Input Ports (VIP)
NOTE
For more information, see the Video Input Port (VIP) section of the device TRM.
CAUTION
The IO timings provided in Section 7, Timing Requirements and Switching
Characteristics are only valid for VIN1 and VIN2 if signals within a single IOSET
are used. The IOSETs are defined in Table 7-3 and Table 7-4.
SIGNAL NAME
Video Input 1
vin1a_clk0
vin1a_d0
vin1a_d1
vin1a_d2
vin1a_d3
vin1a_d4
vin1a_d5
vin1a_d6
vin1a_d7
DESCRIPTION
Table 4-4. VIP Signal Descriptions
Video Input 1 Port A Clock input. Input clock for 8-bit 16-bit or 24-bit Port A video
capture. Input data is sampled on the CLK0 edge.
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
Video Input 1 Port A Data input
TYPE
I
I
I
I
I
I
I
I
I
BALL
F22
G18
G21
G22
H18
H20
H19
H22
H21
Copyright © 2016–2017, Texas Instruments Incorporated
Terminal Configuration and Functions
51
Submit Documentation Feedback
Product Folder Links: TDA3MV TDA3MA TDA3LX TDA3LA