TDA3MV Datasheet, PDF (161/256 Pages) Texas Instruments – TDA3x SoC for Advanced Driver Assistance Systems (ADAS) 15mm Package (ABF) Silicon Revision 2.0

www.ti.com
TDA3MV, TDA3MA
TDA3LX, TDA3LA
SPRS964C – JUNE 2016 – REVISED JULY 2017
NOTE
To configure the desired virtual mode the user must set MODESELECT bit and
DELAYMODE bitfield for each corresponding pad control register.
The pad control registers are presented Table 4-3 and described in Device TRM, Control
Module section.
CAUTION
The IO timings provided in this section are only valid if signals within a single
IOSET are used. The IOSETs are defined in Table 7-32.
In Table 7-32 are presented the specific groupings of signals (IOSET) for use with McASP1.
SIGNALS
mcasp1_aclkx
mcasp1_fsx
mcasp1_aclkr
mcasp1_fsr
mcasp1_axr0
mcasp1_axr1
mcasp1_axr2
mcasp1_axr3
mcasp1_axr4
mcasp1_axr5
mcasp1_axr6
mcasp1_axr7
mcasp1_axr8
mcasp1_axr9
mcasp1_axr10
mcasp1_axr11
mcasp1_axr12
mcasp1_axr13
mcasp1_axr14
mcasp1_axr15
Table 7-32. McASP1 IOSETs
BALL
U17
W17
AA17
U16
W16
V16
U15
V15
Y15
W15
AA15
AB15
AA14
AB14
IOSET1
MUX
1
1
1
1
1
1
1
1
1
1
1
1
1
1
BALL
U17
W17
IOSET2
MUX
1
1
W16
1
V16
1
AA14
1
AB14
1
U13
1
V13
1
Y13
1
W13
1
U11
1
V11
1
BALL
U17
W17
IOSET3
MUX
1
1
W16
1
V16
1
U15
4
V15
4
Y15
4
W15
4
AA15
4
AB15
4
U7
4
V7
4
7.15 Controller Area Network Interface (DCAN and MCAN)
7.15.1 DCAN
The device provides one DCAN interface for supporting distributed realtime control with a high level of
security.
The DCAN interface implements the following features:
• Supports CAN protocol version 2.0 part A, B
• Bit rates up to 1 MBit/s
• 64 message objects
• Individual identifier mask for each message object
Copyright © 2016–2017, Texas Instruments Incorporated
Timing Requirements and Switching Characteristics 161
Submit Documentation Feedback
Product Folder Links: TDA3MV TDA3MA TDA3LX TDA3LA