XC164-16 Datasheet, PDF (54/417 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC164-16 Derivatives
Peripheral Units (Vol. 2 of 2)
The General Purpose Timer Units
Field
Bits Type Description
T5CC
11
rw
Timer T5 Capture Correction
0 T5 is just captured without any correction
1 T5 is decremented by 1 before being captured
CT3
10
rw
Timer T3 Capture Trigger Enable
0 Capture trigger from input line CAPIN
1 Capture trigger from T3 input lines T3IN and/or
T3EUD
T5RC
9
rw
Timer T5 Remote Control
0 Timer T5 is controlled by its own run bit T5R
1 Timer T5 is controlled by the run bit T6R of
core timer 6, not by bit T5R
T5UDE
8
rw
Timer T5 External Up/Down Enable¹⁾
0 Input T5EUD is disconnected
1 Direction influenced by input T5EUD
T5UD
7
rw
Timer T5 Up/Down Control¹⁾
0 Timer T5 counts up
1 Timer T5 counts down
T5R
6
rw
Timer T5 Run Bit
0 Timer T5 stops
1 Timer T5 runs
Note: This bit only controls timer T5 if bit T5RC = 0.
T5M
[5:3] rw
Timer T5 Mode Control (Basic Operating Mode)
000 Timer Mode
001 Counter Mode
010 Gated Timer Mode with gate active low
011 Gated Timer Mode with gate active high
1XX Reserved. Do not use this combination
T5I
[2:0] rw
Timer T5 Input Parameter Selection
Depends on the operating mode, see respective
sections for encoding:
Table 14-16 for Timer Mode and Gated Timer Mode
Table 14-12 for Counter Mode
1) See Table 14-11 for encoding of bits T5UD and T5UDE.
User’s Manual
GPT_X41, V2.0
14-41
V2.1, 2004-03