XC164-16 Datasheet, PDF (183/417 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC164-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Unit 6 (CAPCOM6)
T13 Compare Mode Output Path
Figure 18-30 gives an overview on the signal path from the channel State Bit to its output
pin in its simplest form. As illustrated, a user has a variety of controls to determine the
desired output signal switching behavior in relation to the current state of the State Bit,
CC63ST. Please refer to Section 18.7 for detailed information on the output modulation
control.
State Selection
T13IM
CC63ST
State Bit
CC63ST
CC63ST
CC63_O
COUT63_O
Output
Modulation
Level
Select
COUT63PS
ECT13O
PSL63
To Output Pin
COUT63
MCA05534
Figure 18-30 CC63 Output Path
The output line COUT63_O can generate a T13 PWM at the output pin COUT63. The
signal CC63_O can be used to modulate the T12-related output signals with a T13 PWM.
In order to decouple COUT63 from the internal modulation, the compare state leading to
an active signal can be selected independently by bits T13IM and COUT63PS.
User’s Manual
CAPCOM6_X, V2.0
18-39
V2.1, 2004-03