 English |
|
|
|
|
|
|
|
| XC164-16 Datasheet, PDF (133/417 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units | |||
| |||
| ◁ |
XC164-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Units
CC1_SEE
Single Event Enable Reg.
SFR (FE2EH/17H)
Reset Value: 0000H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh
CC2_SEE
Single Event Enable Reg.
SFR (FE2AH/15H)
Reset Value: 0000H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE SEE
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh rwh
Field
SEEy
Bits Type
15 ⦠0 rwh
Description
Single Event Enable Control
0 Single Event disabled for channel y
1 Single Event enabled for channel y
Note: This bit is cleared by hardware after the event.
To setup a single event operation for a CCy register, software first programs the desired
compare operation and compare value, and then sets the respective bit in register
CCx_SEM to enable the single event mode. At last, the respective event enable bit in
register CCx_SEE is set.
When the programmed compare match occurs, all operations of the selected compare
mode take place. In addition, hardware automatically disables all further compare
matches and reset the event enable bit in register CCx_SEE to 0. As long as this bit is
cleared, any compare operation is disabled. To setup a new event, this bit must first be
set again.
Userâs Manual
CC12_X41, V2.1
17-28
V2.1, 2004-03
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese