XC164-16 Datasheet, PDF (218/417 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC164-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Unit 6 (CAPCOM6)
Field
Bits Type Description
ICC62F
ICC61F
ICC60F
5
rh
Capture, Compare-Match Falling Edge Flag
3
In compare mode, a Compare-Match has been
1
detected while T12 was counting down. In capture
mode, a falling edge has been detected at the input
CC6x (x = 0, 1, 2).
0 The event has not yet occurred
1 The event described above has occurred
ICC62R
ICC61R
ICC60R
4
rh
Capture, Compare-Match Rising Edge Flag
2
In compare mode, a compare-match has been
0
detected while T12 was counting up. In capture
mode, a rising edge has been detected at the input
CC6x (x = 0, 1, 2).
0 The event has not yet occurred
1 The event described above has occurred
1) During the trap state, the selected outputs are set to the passive state.
Note: Not all bits in register IS can generate an interrupt. Other status bits have been
added, which have a similar structure for their set and reset actions.
Note: In compare mode (and hall mode), the timer-related interrupts are only generated
while the timer is running (TxR = 1). In capture mode, the capture interrupts are
also generated while the Timer T12 is stopped.
User’s Manual
CAPCOM6_X, V2.0
18-74
V2.1, 2004-03