XC164-16 Datasheet, PDF (222/417 Pages) Infineon Technologies AG – 16-Bit Single-Chip Microcontroller with C166SV2 Core Volume 2 (of 2): Peripheral Units

XC164-16 Derivatives
Peripheral Units (Vol. 2 of 2)
Capture/Compare Unit 6 (CAPCOM6)
The interrupt sources of the CAPCOM6 module can be mapped to four interrupt nodes
by programming the interrupt node pointer register CC6_INP. The encoding valid for all
bitfields is shown in Table 18-10.
CCU6_INP
Interrupt Node Pointer Reg.
15 14 13 12 11 10
--
INP
T13
INP
T12
--
rw
rw
XSFR (E8D6_H/--)
9876
INP
ERR
rw
INP
CHE
rw
54
INP
CC62
rw
Reset Value: 3940_H
3210
INP
CC61
rw
INP
CC60
rw
Field
INPT13
INPT12
INPERR
INPCHE
INPCC62
INPCC61
INPCC60
Bits Type
[13:12] rw
[11:10] rw
[9:8] rw
[7:6] rw
[5:4] rw
[3:2]
[1:0]
Description
Interrupt Node Pointer for Timer13 Interrupt
This bitfield selects the interrupt request line for
source T13CM and/or source T13PM.
Interrupt Node Pointer for Timer12 Interrupts
This bitfield selects the interrupt request line for
source T12OM and/or source T12PM.
Interrupt Node Pointer for Error Interrupts
This bitfield selects the interrupt request line for
source TRPF and/or source WHE.
Interrupt Node Pointer for the CHE Interrupt
This bitfield selects the interrupt request line for
source CHE and/or source STR.
Interrupt Node Pointer for Channel x Interrupts
This bitfield selects the interrupt request line for
source CC6xR and/or source CC6xF.
Table 18-10 Encoding of Interrupt Node Pointer Bitfields
Bitfield INPxx
Interrupt Output Line to be Activated
00_B
I0
01_B
I1
10_B
I2
11_B
I3
The default assignment of the interrupt sources to the nodes and their corresponding
control registers are listed in Table 18-11.
User’s Manual
CAPCOM6_X, V2.0
18-78
V2.1, 2004-03