PD17012_15 Datasheet, PDF (316/320 Pages) Renesas Technology Corp – 4-BIT SINGLE-CHIP MICROCONTROLLERS WITH DIGITAL TUNING SYSTEM HARDWARE

µPD17012, 17P012
APPENDIX B. DEVELOPMENT TOOLS
The following development tools are available for program development of the µPD17012 and 17P012.
Hardware
Name
In-circuit emulator
IE-17K,
IE-17K-ET^{Note 1}
SE board
(SE-17012)
Emulation probe
(EP-17202GF)
Emulation probe
(EP-17K80GC)
Conversion socket
(EV-9200G-64^{Note 2})
Conversion socket
(EV-9200GC-80^{Note 2})
PROM programmer
AF-9703^{Note 3}
AF-9704^{Note 3}
AF-9705^{Note 3}
AF-9706^{Note 3}
Program adapter
(AF-9776B^{Note 3})
Program adapter
(PA-17P012GC)
Description
IE-17K and IE-17K-ET are in-circuit emulators that can be commonly used with any model
in 17K Series. IE-17K and IE-17K-ET are connected to a host machine, which is a PC-9800 series
or IBM PC/AT^TM, with RS232-C. When these in-circuit emulators are used in combination with the
system evaluation board (SE board) dedicated to each model, they operate as emulators corresponding
to that model. When human interface software SIMPLEHOST^® is used, a more sophisticated
debugging environment can be created.
SE-17012 is SE board for µPD17012 and 17P012. This SE board can be used alone to evaluate the
system (SE-17012) or in combination with an in-circuit emulator for debugging.
EP-17202GF is an emulation probe for the 64-pin plastic QFP (GF-3BE type) of the µPD17012 and
17P012. The SE board and target system are connected when the EP-17202GF is used in
combination with the EV-9200G-64^{Note 2}.
EP-17K80GC is an emulation probe for the 80-pin plastic QFP (GC-8BT type) of the µPD17012 and
17P012. The SE board and target system are connected when the EP-17K80GC is used in
combination with the EV-9200GC-80^{Note 2}.
EV-9200G-64 is a conversion socket for a 64-pin plastic QFP (GF-3BE type). It is used to connect
the EP-17202GF to the target system.
EV-9200GC-80 is a conversion socket for an 80-pin plastic QFP (GC-8BT type). It is used to connect
the EP-17K80GC to the target system.
AF-9703, AF-9704, AF-9705, and AF-9706 are PROM programmers corresponding to µPD17P012.
They can program the µPD17P012 when connected to program adapters AF-9776B and PA-
17P012GC.
AF-9776B is an adapter for programming the 64-pin plastic QFP (GF-3BE type) of the µPD17P012.
It is used in combination with the AF-9703, AF9704, AF-9705, or AF-9706.
PA-17P012GC is an adapter for programming the 80-pin plastic QFP (GC-8BT type) of the µPD17P012.
It is used in combination with the AF-9703, AF9704, AF-9705, or AF-9706.
Notes 1. Low-cost model: external power supply type
2. One EV-9200G-64 is provided with the EP-17202GF. Five EV-9200G-64s are also available as a set.
One EV-9200GC-80 is provided with the EP-17K80GC. Five EV-9200GC-80s are also available as
a set.
3. These are products of Ando Electric Co., Ltd. For details, consult Ando Electric Co, Ltd. (TEL: +81-
3-3733-1166).
314
Data Sheet U10101EJ4V0DS