PD17012_15 Datasheet, PDF (309/320 Pages) Renesas Technology Corp – 4-BIT SINGLE-CHIP MICROCONTROLLERS WITH DIGITAL TUNING SYSTEM HARDWARE

µPD17012, 17P012
Reference Characteristics (TA = +25°C, VDD = 5.0 V)
Parameter
Supply current
(µPD17012)
Supply current
(µPD17P012)
Output current, high
Output current, low
Output current,
intermediate
Symbol
Conditions
MIN. TYP. MAX. Unit
IDD3
With CPU and PLL operating, sine wave input to
VCOH pin (fIN = 130 MHz, VIN = 0.3 Vp-p)
12
mA
IDD4
With CPU and PLL operating, sine wave input to
VCOH pin (fIN = 250 MHz, VIN = 0.3 Vp-p)
13
mA
IDD3
With CPU and PLL operating, sine wave input to
VCOH pin (fIN = 130 MHz, VIN = 0.3 Vp-p)
15
mA
IDD4
With CPU and PLL operating, sine wave input to
VCOH pin (fIN = 250 MHz, VIN = 0.3 Vp-p)
16
mA
IOH3
COM0 to COM2
VOH = VDD −1 V
−300
µA
IOL4
COM0 to COM2
VOL = 1 V
300
µA
IOM1
COM0 to COM2
VOH = VDD − 1 V
−25
µA
IOM2
COM0 to COM2
VOL = 1 V
25
µA
PROM Programming Characteristics (µPD17P012 only)
DC Programming Characteristics (TA = 25°C, VDD = 6.0 ±0.25 V, VPP = 12.5 ±0.5 V)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Input voltage, high
Input voltage, low
Input leakage current
Output voltage, high
Output voltage, low
VDD supply current
VPP supply current
VIH1
Pins other than CLK
VIH2
CLK
VIL1
Pins other than CLK
VIL2
CLK
ILI
VIN = VIL or VIH
VOH
IOH = –1 mA
VOL
IOL = 1.0 mA
IDD
IPP
MD0 = VIL, MD1 = VIH
0.7VDD
VDD – 0.5
0
0
VDD – 1.0
VDD
V
VDD
V
0.2VDD
V
0.4
V
10
µA
V
1.0
V
30
mA
30
mA
Cautions 1. Ensure that VPP does not exceed +13.5 V including overshoot.
2. VDD must be applied before VPP, and cut after VPP.
Data Sheet U10101EJ4V0DS
307