Z80180 Datasheet, PDF (113/326 Pages) Zilog, Inc. – Z8018x Family MPU

Z 8018x Fam ily
M PU Us e r M anual
98
Bit
Position Bit/Field R/W
3–2
SM1:0 W
1
MMOD R/W
Value Description
Source Mode Channel — Specifies whether the source
for channel 0 transfers is memory, I/O, or memory
mapped I/O and the corresponding address modifier.
Reference Table 13.
DMA Memory Mode Channel 0 — When channel 0 is
configured for memory to/from memory transfers, the
external DREQ0 input is not used to control the transfer
timing. Instead, two automatic transfer timing modes are
selectable - BURST (MMOD is 1) and CYCLE STEAL
(MMOD is 0). For BURST memory to/from memory
transfers, the DMAC takes control of the bus
continuously until the DMA transfer completes (as shown
by the byte count register is 0). In CYCLE STEAL mode,
the CPU is given a cycle for each DMA byte transfer
cycle until the transfer is completed.
For channel 0 DMA with I/O source or destination, the
DREQ0 input times the transfer and thus MMOD is
ignored.
Table 12. Channel 0 Destination
DM1
0
0
1
1
DM0
0
1
0
1
Memory/I/O
Memory
Memory
Memory
I/O
Address Increment/Decrement
+1
-1
fixed
fixed
UM005001-ZMP0400