English
Language : 

M16C62P_06 Datasheet, PDF (91/421 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES
M16C/62P Group (M16C/62P, M16C/62PT)
9. Memory Space Expansion Function
Memory expansion mode
Microprocessor mode
00000h
00400h
XXXXXh
04000h
SFR
Internal RAM
Reserved area
08000h Reserved, external area(3)
10000h
27000h
28000h
Reserved area
40000h
External area
SFR
Internal RAM
Reserved area
Reserved, external area(3)
Reserved area
External area
CS3 (16 Kbytes)
CS2 (PM10=0 : 124 Kbytes)
CS2 (PM10=1 : 92 Kbytes)
CS1 (96 Kbytes)
Other than the CS area (512 Kbytes X 8 banks)
C0000h
D0000h
YYYYYh
FFFFFh
Reserved area
Internal ROM
CS0 (Memory expansion mode : 64 Kbytes )
CS0 (Microprocessor mode : 256 Kbytes)
PM13=0
Internal RAM
Capacity Address XXXXXh
4 Kbytes 013FFh
5 Kbytes 017FFh
10 Kbytes 02BFFh
12 Kbytes 033FFh
16 Kbytes 03FFFh(2)
20 Kbytes 03FFFh(2)
24 Kbytes 03FFFh(2)
31 Kbytes 03FFFh(2)
Internal ROM
Capacity Address YYYYYh
48 Kbytes F4000h
64 Kbytes F0000h
96 Kbytes E8000h
128 Kbytes E0000h
192 Kbytes D0000h
256 Kbytes D0000h(2)
320 Kbytes D0000h(2)
384 Kbytes D0000h(2)
512 Kbytes D0000h(2)
CS0
Memory expansion mode
C0000h to CFFFFh
Microprocessor mode
C0000h to FFFFFh
CS1
28000h to
3FFFFh
External area
CS2
When PM10=0
08000h to 26FFFh
When PM10=1
10000h to 26FFFh
CS3
Other than the CS area(1)
04000h to 40000h to BFFFFh
07FFFh
NOTES :
1. The CS0 pin outputs a low signal, and the CS1 to CS3 pins output a bank number.
2. If PM13 bit in the PM1 register is set to “0”, 15 Kbytes of the internal RAM and 192 Kbytes of the internal ROM can be used.
3. For flash memory version, when the PM10 bit in the PM1 register is set to “1”, 0F000h to 0FFFFh can be used as internal ROM area.
Figure 9.4 Memory Mapping and CS Area in 4-Mbyte mode (PM13=0)
Rev.2.41 Jan 10, 2006 Page 76 of 390
REJ09B0185-0241