M16C62P_06 Datasheet, PDF (19/421 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

M16C/62P Group (M16C/62P, M16C/62PT)
1. Overview
Table 1.3 Performance Outline of M16C/62P Group (M16C/62P, M16C/62PT)(80-pin version)
Item
Performance
M16C/62P
M16C/62PT⁽⁴⁾
CPU
Number of Basic Instructions 91 instructions
Minimum Instruction
Execution Time
41.7ns(f(BCLK)=24MHz, VCC1=3.3 to 5.5V) 41.7ns(f(BCLK)=24MHz, VCC1=4.0 to 5.5V)
100ns(f(BCLK)=10MHz, VCC1=2.7 to 5.5V)
Operating Mode
Single-chip mode
Address Space
1 Mbyte
Memory Capacity
See Table 1.4 to 1.7 Product List
Peripheral
Function
Port
Multifunction Timer
Input/Output : 70 pins, Input : 1 pin
Timer A : 16 bits x 5 channels (Timer A1 and A2 are internal timer),
Timer B : 16 bits x 6 channels (Timer B1 is internal timer)
Serial Interface
2 channels
Clock synchronous, UART, I²C bus⁽¹⁾, IEBus⁽²⁾
1 channel
Clock synchronous, I²C bus⁽¹⁾, IEBus⁽²⁾
2 channels
Clock synchronous (1 channel is only transmission)
A/D Converter
10-bit A/D converter: 1 circuit, 26 channels
D/A Converter
8 bits x 2 channels
DMAC
2 channels
CRC Calculation Circuit CCITT-CRC
Watchdog Timer
15 bits x 1 channel (with prescaler)
Interrupt
Internal: 29 sources, External: 5 sources, Software: 4 sources, Priority level: 7 levels
Clock Generation Circuit 4 circuits
Main clock generation circuit (*), Subclock generation circuit (*),
On-chip oscillator, PLL synthesizer
(*)Equipped with a built-in feedback resistor.
Oscillation Stop
Detection Function
Stop detection of main clock oscillation, re-oscillation detection function
Voltage Detection Circuit Available (option ⁽⁴⁾)
Absent
Electric
Supply Voltage
Characteristics
VCC1=3.0 to 5.5 V, (f(BCLK=24MHz) VCC1=4.0 to 5.5V, (f(BCLK=24MHz)
VCC1=2.7 to 5.5 V, (f(BCLK=10MHz)
Power Consumption
14 mA (VCC1=5V, f(BCLK)=24MHz)
8 mA (VCC1=3V, f(BCLK)=10MHz)
1.8µA (VCC1=3V, f(XCIN)=32kHz,
wait mode)
14 mA (VCC1=5V, f(BCLK)=24MHz)
2.0µA (VCC1=5V, f(XCIN)=32kHz,
wait mode)
0.8µA (VCC1=5V, stop mode)
0.7µA (VCC1=3V, stop mode)
Flash memory
version
Program/Erase Supply Voltage 3.3 ± 0.3V or 5.0 ± 0.5V
5.0 ± 0.5V
Program and Erase
Endurance
100 times (all area)
or 1,000 times (user ROM area without block A and block 1)
/ 10,000 times (block A, block 1) ⁽³⁾
Operating Ambient Temperature
-20 to 85°C,
-40 to 85°C ⁽³⁾
T version : -40 to 85°C
V version : -40 to 125°C
Package
80-pin plastic mold QFP
NOTES:
1. I²C bus is a registered trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
3. See Table 1.8 and 1.9 Product Code for the program and erase endurance, and operating ambient
temperature.
In addition 1,000 times/10,000 times are under development as of Jul., 2005. Please inquire about a release
schedule.
4. All options are on request basis.
Rev.2.41 Jan 10, 2006 Page 4 of 390
REJ09B0185-0241