M16C62P_06 Datasheet, PDF (344/421 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

M16C/62P Group (M16C/62P, M16C/62PT)
23. Electrical Characteristics
VCC1=VCC2=3V
Table 23.30 Electrical Characteristics (1) ⁽¹⁾
Symbol
Parameter
Measuring Condition
VOH
VOH
HIGH Output P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
Voltage ⁽³⁾ P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P14_0, P14_1
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
HIGH Output Voltage XOUT
HIGHPOWER
LOWPOWER
IOH=−1mA
IOH=−1mA ⁽²⁾
IOH=−0.1mA
IOH=−50µA
HIGH Output Voltage XCOUT
HIGHPOWER
With no load applied
LOWPOWER
With no load applied
VOL
LOW Output P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4,
IOL=1mA
Voltage ⁽³⁾ P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P14_0, P14_1
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
IOL=1mA ⁽²⁾
VOL
LOW Output Voltage XOUT
HIGHPOWER
LOWPOWER
IOL=0.1mA
IOL=50µA
LOW Output Voltage XCOUT
HIGHPOWER
With no load applied
LOWPOWER
With no load applied
VT+-VT- Hysteresis
HOLD, RDY, TA0IN to TA4IN,
TB0IN to TB5IN, INT0 to INT5, NMI,
ADTRG, CTS0 to CTS2, CLK0 to CLK4,
TA0OUT to TA4OUT, KI0 to KI3, RXD0 to RXD2,
SCL0 to SCL2, SDA0 to SDA2, SIN3, SIN4
VT+-VT- Hysteresis _RESET
IIH
HIGH Input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
VI=3V
Current ⁽³⁾ P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7,
P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1,
XIN, RESET, CNVSS, BYTE
IIL
LOW Input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
VI=0V
Current ⁽³⁾ P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7,
P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1,
XIN, RESET, CNVSS, BYTE
RPULLUP Pull-Up
Resistance
(3)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 VI=0V
to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to
P6_7, P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7,P12_0 to P12_7, P13_0 to P13_7,
P14_0, P14_1
RfXIN
Feedback Resistance XIN
RfXCIN Feedback Resistance XCIN
VRAM
RAM Retention Voltage
At stop mode
Standard
Unit
Min. Typ. Max.
VCC1−0.5
VCC2−0.5
VCC1
V
VCC2
VCC1−0.5
VCC1−0.5
VCC1
V
VCC1
2.5
V
1.6
0.5
V
0.5
0.5
V
0.5
0
V
0
0.2
0.8 V
0.2 (0.7) 1.8 V
4.0 µA
−4.0 µA
50
100 500 kΩ
3.0
MΩ
25
MΩ
2.0
V
NOTES:
1. Referenced to VCC1 = VCC2 = 2.7 to 3.3V, VSS = 0V at Topr = −20 to 85°C / −40 to 85°C, f(XIN)=10MHz no wait unless
otherwise specified.
2. VCC1 for the port P6 to P11 and P14, and VCC2 for the port P0 to P5 and P12 to P13
3. There is no external connections for port P1_0 to P1_7, P4_4 to P4_7, P7_2 to P7_5 and P9_1 in 80-pin version.
Rev.2.41 Jan 10, 2006 Page 329 of 390
REJ09B0185-0241