MB87P2020 Datasheet, PDF (238/356 Pages) Fujitsu Component Limited. – Colour LCD/CRT/TV Controller

MB87J2120, MB87P2020-A Hardware Manual
1.1.2 Buffer types
Table 1-3 shows all used buffers for MB87P2020-A.
Table 1-3: Buffer types for MB87P2020-A
Buffer type
B3NNLMR2X
B3NNNMR2X
BFNNQHX
BFNNQLX
BFNNQMX
BX4MFSR2X
IPBIX
ITAMX
ITAVDX
ITAVSX
ITBSTX
ITCHX
ITFHX
ITTSTX
IXN3X
OTAMX
OTFTQMX
VPDX
Description
Bidirectional True buffer (3.3V CMOS, IOL=4mA,Low Noise type, ESD
improved)
Bidirectional True buffer (3.3V CMOS, IOL=4mA, ESD improved)
Bidirectional True buffer (5V Tolerant, IOL=8mA, High speed type)
Bidirectional True buffer (5V Tolerant, IOL=2mA, High speed type)
5V tolerant, bidirectional true buffer 3.3V CMOS, IOL/IOH=4mA
Oscillator Output (ESD improved)
Input True Buffer for DRAM TEST (2.5V CMOS with 25K Pull-up)
(SDRAM test only)
Analog Input buffer
Analog Power Supply
Analog GND
Input True Buffer for DRAM TEST (2.5V CMOS with 25K Pull-down)
(SDRAM test only)
Input True buffer (2.5V CMOS)
5V tolerant 3.3V CMOS Input
Input True buffer for DRAM TEST Control (2.5V CMOS with 25K Pull-down)
Oscillator Input (ESD improved)
Analog Output
5 V tolerant 3.3V tri-state output, IOL/IOH=4mA
3.3V CMOS input, disable input for Pull up/down resistors, connect to GND
1.2 Pinning for MB87P2020
1.2.1 Pinning
Table 1-4 shows the pinning for MB87P2020 (Jasmine) sorted by pin number while table 1-5 is sorted by
names. Both tables refer to a standard Fujitsu 208-pin (L)QFP package FPT-208P-Mxx.
Table 1-4: MB87P2020 pinning sorted by pin number
Pin
Name
1
MODE[0]
2
MODE[1]
3
GND
Buffer type
BFNNQLX
BFNNQLX
GND
Mode Pin
Mode Pin
Description
Page 238