MC68HC908LD64 Datasheet, PDF (301/362 Pages) Freescale Semiconductor, Inc – Microcontrollers

Input/Output (I/O) Ports
Port B
19.4.2 Data Direction Register B
Data direction register B (DDRB) determines whether each port B pin is
an input or an output. Writing a logic 1 to a DDRB bit enables the output
buffer for the corresponding port B pin; a logic 0 disables the output
buffer.
Address: $0005
Bit 7
6
5
4
3
2
1
Read:
DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1
Write:
Reset: 0
0
0
0
0
0
0
Figure 19-7. Data Direction Register B (DDRB)
Bit 0
DDRB0
0
DDRB[7:0] — Data Direction Register B Bits
These read/write bits control port B data direction. Reset clears
DDRB[7:0], configuring all port B pins as inputs.
1 = Corresponding port B pin configured as output
0 = Corresponding port B pin configured as input
NOTE: Avoid glitches on port B pins by writing to the port B data register before
changing data direction register B bits from 0 to 1.
Figure 19-8 shows the port B I/O logic.
READ DDRB ($0005)
WRITE DDRB ($0005)
RESET
WRITE PTB ($0001)
DDRBx
PTBx
PTBx
READ PTB ($0001)
Figure 19-8. Port B I/O Circuit
MC68HC908LD64 — Rev. 3.0
Freescale Semiconductor
Input/Output (I/O) Ports
Data Sheet
301