MC68HC908LD64 Datasheet, PDF (161/362 Pages) Freescale Semiconductor, Inc – Microcontrollers

Timer Interface Module (TIM)
I/O Registers
11.10 I/O Registers
The following I/O registers control and monitor operation of the TIM:
• TIM status and control register (TSC)
• TIM counter registers (TCNTH:TCNTL)
• TIM counter modulo registers (TMODH:TMODL)
• TIM channel status and control registers (TSC0 and TSC1)
• TIM channel registers (TCH0H:TCH0L and TCH1H:TCH1L)
11.10.1 TIM Status and Control Register (TSC)
The TIM status and control register does the following:
• Enables TIM overflow interrupts
• Flags TIM overflows
• Stops the TIM counter
• Resets the TIM counter
• Prescales the TIM counter clock
Address: $000A
Bit 7
6
5
4
3
2
1
Bit 0
Read: TOF
0
0
TOIE TSTOP
Write: 0
TRST
PS2
PS1
PS0
Reset: 0
0
1
0
0
0
0
0
= Unimplemented
Figure 11-3. TIM Status and Control Register (TSC)
TOF — TIM Overflow Flag Bit
This read/write flag is set when the TIM counter reaches the modulo
value programmed in the TIM counter modulo registers. Clear TOF by
reading the TIM status and control register when TOF is set and then
writing a logic zero to TOF. If another TIM overflow occurs before the
clearing sequence is complete, then writing logic zero to TOF has no
MC68HC908LD64 — Rev. 3.0
Freescale Semiconductor
Timer Interface Module (TIM)
Data Sheet
161