MC68HC08AZ60 Datasheet, PDF (61/452 Pages) Motorola, Inc – Advance Information

Freescale Semiconductor, Inc.
EEPROM-2
Functional Description
EERAS1 and EERAS0 — Erase Bits
These read/write bits set the erase modes. Reset clears these bits.
Table 2. EEPROM Program/Erase Mode Select
EEBPx
0
0
0
0
1
X = don’t care
EERAS1
0
0
1
1
X
EERAS0
0
1
0
1
X
MODE
Byte Program
Byte Erase
Block Erase
Bulk Erase
No Erase/Program
EELAT — EEPROM Latch Control
This read/write bit latches the address and data buses for
programming the EEPROM array. EELAT cannot be cleared if
EEPGM is still set. Reset clears this bit.
1 = Buses configured for EEPROM programming
0 = Buses configured for normal read operation
EEPGM — EEPROM Program/Erase Enable
This read/write bit enables the internal charge pump and applies the
programming/erasing voltage to the EEPROM array if the EELAT bit
is set and a write to a valid EEPROM location has occurred. Reset
clears the EEPGM bit.
1 = EEPROM programming/erasing power switched on
0 = EEPROM programming/erasing power switched off
NOTE:
Writing logic 0s to both the EELAT and EEPGM bits with a single
instruction will clear EEPGM only to allow time for the removal of high
voltage.
9-eeprom-2
MOTOROLA
MC68HC08AZ60 — Rev 1.0
EEPROM-2
61
For More Information On This Product,
Go to: www.freescale.com